Elektroshema Gaz 3309 Dizelj

Contents • • • • • • History [ ] After the launch of the GAZelle, whose demand was astronomic, the plant secured a stable influx of needed revenue for its own upgrade and future models. Having failed to introduce the 3103/3102/3105 family, and seeing that demand for the GAZ-31029 Volga was still high, it was clear that the car could and would soldier on for a considerable time. Instead of experimenting with 'temporary' cars, such was the inherit nature of both the 24-10 and 31029, a more permanent solution was chosen by giving the vehicle a major upgrade. Work began in 1995, and a prototype was shown at the Moscow car show that year. Overall the GAZ-3110 was an instant success, despite its aged profile, GAZ finally had a car that could bridge a gap before the planned new vehicle () entered in the early 2000s.

Though hardly a rival for new foreign marques, it certainly did snatch their re-sale market in its favour. Prices in 1997 was US$8800 for the budget version with 402 engine, and US$12,900 for the 406 equipped. Even the hardly affected the Volga's demand, quite the contrary, GAZ capitalised on marketing it as an inexpensive alternative. However, the car was still plagued by the common reliability issues of all 1990s built cars: poor assembly quality, faulty electronics, and low service culture, especially for the fuel-injected 406 models. The latter engine in 1999 already had its first refit and a compression ratio reduced to 9.2 to avoid detonation, reducing the power from 150 to 131 hp. As the decade closed, in 2000 GAZ was in active preparation to launch the 3111 Volga. The vehicle demanded a serious upgrade to existing facilities at the plant, and as these came online, they were extensively tested by the 3110.

For example, the new paintshop, when introduced to the conveyor, with attractive acrylic and metallic finishes, helped to tackle the major corrosion problems of the 3110. Simultaneously came the new 265/70R15 tyres. A small series of licence-built Diesel engines (ZMZ-560) were available. The coming of the 3111, would not have replaced the 3110 altogether, and to finish its conveyor lifetime in 2001 a small visual facelift introduced body coloured bumpers with a black resin trim, that featured drooping spoilers and integrated fog lamps.

Technical details [ ]. Post-2001 MY Volga The engine unit for the new car was already present and a test batch of ZMZ-406 equipped GAZ-31029s was available since 1996. Sharing the 402's piston group, the motor was to all intents and purposes completely new, despite undergoing a lengthy research and design period. The motor's brief was drawn in 1982, and finalised only in 1986, to be used on the new 3103 and 3104 models. A contemporary twin overhead camshaft (DOHC)—four valve per cylinder scheme was chosen with intake. The high inertia of the limited potential forced induction, and was thus reduced from 92 to 86, hence a volume decline of 2445 cc to 2286 cc. Compression on the naturally aspirated 406 was now 9.3 instead of 8.5 of the 402, and the redline grew to 5500 RPM (4750 on the 402).

The GAZ M21 Volga is an automobile which was produced in the Soviet Union by GAZ from. Truck GAZ-51 GAZ-3307/3309 GAZ-63 GAZ-3308 Sadko.

A two-step was implemented for reliability, and a cast iron cylinder block to give it necessary strength when used on future modifications with forced induction and/or diesels. The 406 engine was mated to the five-speed gearbox. Front disk brakes and power steering was now standard. Externally the car retained only 'skeletal' details of its predecessor: central pillars, doors and platform. The remaining panels were designed from scratch, simultaneously tying in the mid-1990s contoured fashion with passive security.