Instructions On Installing Everbilt Tank Lever

Instructions: • Turn off water supply and flush to empty tank. Remove excess water with sponge. • Disconnect water supply line from ballcock. • Using a screwdriver to hold the bolts secure, remove the nuts with a wrench. • Remove tank from bowl and replace bolts by placing bolts through tank with metal washer first followed by a rubber washer seating on inside of tank. • Screw hex nut on bolt to bottom of tank.

Replace tank-to-bowl gasket. • Put tank in place on top of bowl. • Place the other rubber washer on bolt followed by metal washer. • Thread wing nut on bolt. • Hold bolt with screwdriver and tighten wing nut with pliers making sure the tank is level and secure. DO NOT OVERTIGHTEN. • Reconnect supply line and turn on water.

MOUNT TANK: slowly bend new tank lever arm to match old tank lever arm. Or position new tank lever in tank to determine arm angle needed. Remove, then slowly bend new tank lever arm to match the angle of the tank. Download soundtrack clannad dango. DO NOT BEND ARM TOO QUICKLY OR BACK AND FORTH REPEATEDLY. Measure length of existing tank lever (it should be 4', 6', 8' or 9'). Detach the chain from the flush lever inside the tank and remove the present hook on the end of the chain, if there is one. Insert the Y-hook into a link of the chain. Squeeze the sides of the Y hook together and insert it through a hole in the flush lever and release the Y hook. Examine whether the chain is tight enough to prevent it.

Check for leaks.

Replacing your old trip lever is a simple way to keep your Toto toilet functioning properly and efficiently, so you can continue to rely on it for years to come. A new trip lever with a different finish is also an inexpensive means of matching updated bathroom decor - without having to sacrifice your durable, beautiful Toto toilet! We strongly believe that Toto offers some of the best quality toilet products available, seamlessly combining beauty and function, and PlumbingSupply.com ® is proud to be your source for Toto toilets and replacement parts. Frequently Asked Questions Q. 'How do I tell what type of toilet trip lever I have?' To determine what type of trip lever you have, you will need to note where the trip lever is mounted on the outside, then open the toilet tank and see how it is mounted, and how it is angled towards the flush valve. Once you have determined how your trip lever is installed in relation to the tank and flush valve, you should be able to select a trip lever from our extensive offerings.

'How do I tell what type of mount my trip lever is?' There are several ways trip levers are mounted; the style will depend on the manufacturer's shape of the tank, and the location of the flush valve. The styles are angle mount, side mount, front mount, right-hand mount, and offset. The angle mount typically has a 45° angle in the arm so that it can reach the flush valve located near the center of the tank. The side mount trip lever is for toilets that need a trip lever on the left side of the toilet tank (when standing and facing the toilet). Front mount toilets are one of the more common styles, and are mounted on the left/front of the tank (unless it is noted as 'right hand mount').

Right hand mount is located on the right/front side of the tank. The offset trip lever has a long arm, and is angled to work around a less commonly angled tank shape. 'What are the trip levers made of?' Some trip levers have a metal handle and brass arm; however, as more and more homeowners opt to replace parts themselves, plastic replacement trip levers have become more readily available as a less expensive alternative. The metal trip levers are of superior quality when compared to plastic, and will far outlast them. Unfortunately, plastic trip levers are more likely to deteriorate than the all metal ones, making replacement more likely, more often.